DIY MFOS 16-Step Quantized Vari-Clock Analogue Sequencer KB
We always recommend visiting the MFOS website before building where the latest 'offical' information and news can be found. Here on the Soundtronics website, you will find selected information from the MFOS site plus additional information and resources to aid the building and maintaining of your MFOS synth. This is not going to happen over-night but during the course of 2014, it will start to take shape as we document our experiences in the construction of these modules. We would also like to include any experiences, hints and tips from customers as well so feel free to contact us or simply post a comment using the form at the foot of this page.
Introduction to the MFOS 16-Step Quantized Vari-Clock Analogue Sequencer
This circuit provides a simple way to change the duration of each step in a 16 step sequencer but do so in a quantized manner. It is designed to be used with the MFOS 16 Step Sequencer. Integrating this clocking scheme into the current MFOS 16 Step Sequencer is not hard and merely requires the removal of a few components on the sequencer's digital board and a few connections between the MFOS 16 Step Sequencer digital board and the new Quantized Vari-Clock module.
Features
- Each step's duration can be set independently.
- Each step's duration is settable from 1 to 16 clock cycles.
- Main clock adjustment affects all steps equally.
- Clock selection: Quantized or Normal
- Two gate/trigger modes: Single per step and Multi per step.
- External clock supported.
- Clock out supported.
Documentation & Downloads
- MFOS Original Build Documentation (We have taken the MFOS VCO webpage and converted it to a PDF document for easy reading and printing out)
- Schematic Page 1
- Schematic Page 2
- Schematic Page 3
Under Construction